A client in the north-east of England has ordered a THIRD ceramic "candle" filter from us.
Unfortunately, we can't quite do the "four candles" gag yet!
This filter has Cerafil elements and follows a trusted design harking back to the 1990s. In fact, when we designed the second filter for this client, they specifically asked us to replicate their original filter that had been in service for 26 years at that point.
The main drive of this project is to enable the client to add a third manufacturing plant that replicates all the features and conditions of the original filter, as the filter unit's operation proves crucial in the client’s unique manufacturing process.
Filter Designs are thrilled to have been asked, yet again, to support this client.
We were contracted to provide 2 small Ceramic filters suitable for a small volume but with a design maximum temperature of 600°C. In addition the filters will be handling a syngas which cannot be mixed with oxygen so an alternative to compressed air would need to be used for the ‘Cleanpulse’ cleaning of the 25 Ceramic element in each of these CPC78 filters. In addition dosing of small amounts of a re-agent is required so the client also opted for a ‘Cleandose’ 25kg bag skid. Find out more about Project CAD below.